How to maintain the brightness of the plexiglass display stand

As a display product that has been exposed to the air for a long time, the surface of the plexiglass display frame often has some dust or a source of contamination. It is necessary to maintain its bright characteristics and regular cleaning.

Second, choose a mild detergent. During cleaning and maintenance, you can choose a soft cleaning agent to wipe the acrylic products, especially avoid using a strong alkaline cleaning agent to prevent the cleaning agent from causing damage to the surface of the display, and the display stand loses its luster.

Usually we can see a lot of cosmetics display racks in the mall, if you see some dusty local staff will take care of them. Shop assistants often clean and maintain plexiglass display stands to keep them fresh and glamorous. However, some mistakes and neglected cleaning and maintenance methods, although temporarily making the plexiglass display stand clean, actually cause potential damage to the plexiglass display stand, and your plexiglass display stand will have irreparable problems.

Several problems are easy to occur in the maintenance of acrylic display stands and the ways to avoid them are as follows:

1.The rag should be clean

When cleaning and maintaining the plexiglass display stand, be sure to make sure the rag is clean. After cleaning or wiping off the dust, be sure to turn over or replace it with a clean cloth. Don't be lazy and repeatedly use the dirty side, which will only cause the dirt to repeatedly rub on the surface of the acrylic product, but will damage the bright surface of the plexiglass display.

2.Care agent

In order to maintain the original brightness of the plexiglass display stand, there are currently two display stand care products, such as display stand care spray wax and cleaning and maintenance agent. The former is mainly used for display frames of various wood, polyester, paint, fireproof rubber sheets, etc., and has two different fresh fragrances of jasmine and lemon. The latter is suitable for all kinds of wood display frames such as wood, glass, synthetic wood or melamine board, especially for display frames with mixed materials.